Gå tillbaka till alla artiklar

What types of septic systems are available in Canada?

Installation of the Pack model of the polyethylene Ecoflo compact biofilter at a residential site in Ontario.

Feeling overwhelmed with technical jargon as you search for a septic system for your home or cottage?

Don't worry, you're not alone.

We understand how tough it can be to find a solution that works for you.

That's why we made a guide to explain the different types of residential septic systems available in Canada. We'll tell you where each one is used, how it works, and what makes it a good choice (or not-so-good choice) for your needs.

The most basic septic systems

For rural homeowners in Ontario and other Canadian provinces, a basic septic system is often the go-to solution for wastewater treatment.

This category includes “old types of septic systems” that are economical and easy to install thanks to their straightforward designs. They are a popular choice for flat properties with plenty of space, permeable soil, and a low water table.

There are two basic systems to consider: traditional and chamber systems. While they both operate on similar principles, each has its own set of advantages and disadvantages.

Traditional septic systems

2D diagram of how a conventional septic system works, including the septic tank and the septic drain field.


A traditional septic system has a septic tank connected to a drain field (also known as a leach field). In most cases, the drain field is a network of perforated pipes placed over a bed of gravel and sand.

This system is often the solution of choice due to its simplicity. The purchase and installation costs are modest, and maintenance is mostly limited to regular septic tank pump-outs. On the flip side, traditional systems do not last forever. When the time comes for a replacement, extensive excavation is necessary, which can damage your landscaping.

A traditional septic system works in a few simple steps.

Wastewater flows into the septic tank, where solids settle on the bottom and scum floats to the top. Clarified liquid flows through an outlet pipe to a drain field. Once there, it seeps onto a bed of sand and gravel and percolates through the ground.

Microbes in the soil remove any remaining contaminants. Treated wastewater then returns to the groundwater below.

Advantages:

  • economical
  • silent
  • no mechanical parts
  • minimal maintenance
     

Disadvantages:

  • not appropriate for sites with impermeable soils or high water tables
  • large overall footprint
  • full excavation needed to replace system

Chamber septic systems

2D diagram of how a chamber septic system works, including the septic tank and the drain field.


Like traditional septic systems, chamber systems have a septic tank with an outlet pipe that leads to a drain field. The difference is that a chamber septic system has a specialized dispersal area with open-bottom plastic leaching chambers.

Chamber drain fields have a higher treatment capacity than traditional drain fields. This reduces the risk of hydraulic overload, which happens when incoming wastewater exceeds the flow rate that your system was designed to handle.

These drain fields also reduce the need for gravel. By using less material than a traditional system, you may lower the overall cost of the installation.

A chamber septic system uses a septic tank for primary treatment. The septic tank clarifies wastewater before discharging it to the specialized drain field.

The drain field has plastic leaching chambers that contain perforated pipes. The pipes disperse effluent into the chambers. The chambers retain some of the effluent and allow the rest to percolate into soil or system sand.

Microbes in the underlying soil complete the treatment process by removing any remaining contaminants.

Advantages:

  • economical
  • no mechanical parts
  • high-capacity drain field
  • smaller footprint than traditional septic systems
  • minimal maintenance
     

Disadvantages

  • not appropriate for sites with impermeable soils or high water tables
  • full excavation needed to replace system

Advanced secondary treatment septic systems

Advanced secondary treatment septic systems offer a higher level of treatment than basic systems, providing an added layer of protection for your family and the environment.

While these systems come with a higher price tag, they are also highly specialized and can be tailored to work with difficult soils, smaller lots, and uneven terrains. That makes them a great solution if you face these challenges.

Choosing an advanced system can be daunting, but we have you covered. We’ll explain all the information you need to pick the right system for your property.

Biofilters for wastewater treatment

2D diagram of how an advanced septic system works, including the septic tank, the advanced treatment unit, and the septic drain field.

 

Biofilters use a passive treatment process called biofiltration. Instead of relying on chemicals or electricity, biofilters let wastewater flow through a filter made of organic or synthetic materials. The filter mimics the way soil naturally treats wastewater.

Typical filtering media include peat, sand, geotextile sheets, and foam cubes. But if you’re looking for a more environmentally friendly way to treat your wastewater, we suggest the coconut husk fragments in our Ecoflo products.

The Ecoflo compact biofilter is perfect for small lots, impermeable soils, and sites with limited access. The Ecoflo linear biofilter, on the other hand, is best for properties with enough space for a limited drain field.

A biofilter system uses a septic tank for the first stage of treatment. Raw wastewater enters the septic tank and clarified liquid moves on to the biofilter unit.

Inside the biofilter, wastewater trickles through a filtering medium where bacteria naturally grow. These bacteria remove pollutants, simulating the treatment process that takes place in permeable soil. Biofilters are designed to promote free airflow, creating perfect conditions for microbes to thrive and carry out effective treatment.

After wastewater is treated in the biofilter, the system sends it to a drain field or safely releases it into the environment.

Advantages:

  • compact and discreet
  • appropriate for sites with impermeable soils and high water tables
  • ideal for variable flow rates and periods of non-use
  • no electricity for treatment
  • low operating costs
  • no (or few) mechanical parts
  • easy access for repairs and filter renewals
     

Disadvantages:

  • regular maintenance
  • higher purchase cost than basic systems

Aerobic treatment units

2D diagram of how an aerobic treatment unit works, including the septic tank and the septic drain field.


An aerobic treatment unit (ATU) is a treatment tank where air is injected to encourage the growth of helpful bacteria. These bacteria feed on wastewater pollutants.

ATUs are more efficient at breaking down organic waste than basic septic systems, which makes them a good choice for areas with higher effluent standards. They also work well on properties with poor soils or high water tables. But there are some negatives. ATUs need electricity and compared to other systems, they require more upkeep to maintain their treatment performance.

The septic tank is an important part of an ATU system. It traps solids and scum and sends clarified wastewater to the ATU.

The ATU tank has an aeration chamber. Pumps inject air into the chamber to support the growth of bacteria and other microorganisms that break down pollutants. Aeration also maximizes treatment efficiency by allowing more contact between bacteria and pollutants.

Bacteria may live in different places depending on the type of ATU you choose. Suspended growth treatment units keep bacteria in the liquid inside the aeration chamber. In attached growth treatment units, bacteria are attached to a synthetic material, such as plastic balls, ribbons, or shavings.

After treatment, the ATU discharges wastewater to a drain field for final dispersal.

New ATU septic systems do not offer peak performance on Day 1. They need a start-up period of a few days before microbes in the aeration chamber can effectively treat wastewater.

Advantages:

  • breaks down organic matter
  • compact and visually discreet
  • appropriate for sites with impermeable soils and high water tables
  • accessible for repairs
     

Disadvantages:

  • frequent maintenance
  • electricity for air pumps
  • noise from air pumps
  • mechanical parts can malfunction or break
  • risk of untreated effluent contaminating soil
  • limited ability to handle sudden increases in wastewater flow
  • lag time between installation and effective treatment

To decide if an ATU is better than a biofilter, look at a few key factors:

  • installation requirements
  • treatment performance
  • sludge build-up
  • long-term costs
     

We made the choice easier for you with a buying guide that compares two popular options: Bionest-type ATUs and the Ecoflo biofilter.

Compare ATUs and biofilters

Sand mound septic systems

2D diagram of how a sand mound septic system works, including the septic tank and the drain field.


Sand mound systems use an elevated above-ground sand layer as a substitute for permeable soil. Bacteria in the sand layer break down wastewater pollutants before effluent is released back into the environment.

These systems are a good option for sites with impermeable soils or high water tables. But they require more space and sand than other options. As septic sand becomes increasingly scarce, it’s important to ask if this solution aligns with your environmental values.

In a sand mound septic system, the septic tank separates solid waste and scum from wastewater. Clarified liquid then moves downstream to a dosing chamber.

The dosing chamber pumps measured doses of wastewater to the top of the sand layer. As wastewater trickles through the sand, naturally occurring bacteria remove contaminants. Treated effluent then seeps into an underlying trench before returning to groundwater.

Advantages:

  • low operating costs
  • appropriate for sites with impermeable soils and high water tables
     

Disadvantages:

  • large overall footprint
  • not discreet
  • pumps are required
  • mechanical parts can malfunction or break
  • full excavation needed to replace system
  • septic sand is non-renewable and increasingly expensive

Recirculating sand filter system

2D diagram of how a recirculating sand filter septic system works, including the septic tank and the drain field.


Recirculating sand filter systems treat wastewater by combining an elevated above-ground sand layer with a recirculation station. Bacteria in the sand layer remove contaminants before effluent is dispersed.

These systems are most often used on sites with impermeable soils, high water tables, and abundant space. But because they need a lot of sand, and septic sand is running out, you may decide that a greener solution is a better fit for your property.

A recirculating sand filter uses a septic tank for primary treatment. Raw wastewater enters the septic tank and clarified effluent moves on to a recirculation station.

The recirculation station always contains a portion of treated wastewater. This liquid mixes with and dilutes wastewater that arrives from the septic tank.

The recirculation station’s pump sends measured doses to the sand filter. Wastewater seeps through the sand, where bacteria remove pollutants. Treated wastewater collects in drains beneath the sand layer. A portion returns to the site’s native soil, and the rest goes back to the recirculation station.

Advantages:

  • more compact than sand mound systems
  • appropriate for sites with impermeable soils and high water tables
     

Disadvantages:

  • not discreet
  • regular maintenance and monitoring
  • electricity for pumps and controls
  • mechanical parts can malfunction or break
  • full excavation needed to replace system
  • septic sand is non-renewable and increasingly expensive

Drip irrigation septic systems

2D diagram of how a drip irrigation septic system works, including the septic tank and the septic drain field.


Drip irrigation systems are sometimes known as trickle irrigation or drip distribution systems. They are a bit like basic septic systems. They treat wastewater in a septic tank and a drain field. But instead of using perforated drain field pipes, they release effluent through a network of specialized tubes.

The flexibility of drip tubing makes these systems a good choice for sloped sites. The overall footprint is discreet, but it tends to be larger than that of traditional drain fields.

The first component in a drip system is the septic tank. Wastewater solids settle at the tank’s bottom and scum rises to the surface. Clarified liquid exits through an outlet pipe that leads to a dosing device.

The dosing device sends measured doses through a network of tubes in the drain field. Wastewater drips through perforations in the tubes and onto a bed of sand and gravel. Microbes in the soil remove contaminants before effluent returns to groundwater.

Drip irrigation systems often use a filtering or flushing device to avoid premature clogging by larger particles.

Advantages:

  • control over amount of wastewater sent to drain field
  • ideal for sloped sites
  • appropriate for sites with shallow soils
  • visually discreet
     

Disadvantages:

  • frequent maintenance
  • electricity for pumps and controls
  • mechanical parts can malfunction or break
  • large overall footprint
  • full excavation needed to replace system

Evapotranspiration bed septic systems

2D diagram of how an evapotranspiration septic system works, including the septic tank and the drain field.


Evapotranspiration bed septic systems use natural evaporation and transpiration processes to send treated wastewater into the atmosphere rather than groundwater.

Depending on factors like soil and weather, certain installations may combine both atmospheric discharge and soil infiltration.

Because they don’t rely on soil infiltration alone, these systems can be used on sites with impermeable or arid soils, low percolation rates, or high water tables. As a bonus, the plant life needed for transpiration may enhance the visual appeal of the installation.

Evapotranspiration bed systems include a septic tank. The tank retains solids and scum and allows clarified liquid to flow into a series of distribution pipes.

The pipes send wastewater into the evapotranspiration bed’s lower level, which is filled with sand and has an impermeable liner that prevents soil contamination. Effluent slowly rises to the bed’s surface, where it eventually evaporates.

Plants on the bed’s surface provide additional treatment by absorbing wastewater through their roots. This allows effluent to naturally transpire into the air.

Advantages:

  • appropriate for sites with shallow or arid soils and high water tables
  • low operating costs
  • plant life improves visual appeal
     

Disadvantages:

  • larger footprint than other systems
  • constant maintenance
  • not suitable for all regions
  • excess rain can impair treatment performance
  • full excavation needed to replace system

Constructed wetland septic systems

2D diagram of how a constructed wetland septic system works, including the septic tank and the septic drain field.


Constructed wetland septic systems, also called reed beds, treat wastewater by imitating the processes in natural wetlands and marshes. These systems look a bit like a pond. Aquatic plants float on the surface. A gravel bed on a waterproof lining sits at the bottom.

This type of solution offers cost-effective treatment and an aesthetically pleasing appearance. The trade-off is that it requires plenty of space and needs constant maintenance. Special care must also be taken to avoid invasive aquatic plants that attract pests.

Like other advanced secondary systems, constructed wetlands rely on a septic tank for primary treatment. The tank retains solids and scum from raw wastewater and allows clarified liquid to flow into a pond.

As soon as wastewater arrives in the pond, submerged plant roots and microbes in the gravel bed begin to remove contaminants. The roots also feed the pond with oxygen and help to reduce concentrations of nitrogen and phosphorus.

A sump regulates the pond’s water level and sends effluent downstream for further treatment or safe dispersal.

Advantages:

  • low operating costs
  • enhanced visual aspect
  • reduces nitrogen and phosphorus concentrations
     

Disadvantages:

  • constant maintenance
  • large overall footprint
  • not appropriate for sites with high water tables or dry soils
  • electricity for sump pump
  • mechanical parts can malfunction or break
  • possibility of invasive plants or pests
  • full excavation needed to replace system

Tertiary treatment septic systems

Tertiary treatment septic systems use highly developed processes to produce effluent that is up to 10 times cleaner than that of basic septic systems. They protect public health and sensitive environments by ensuring that treated wastewater meets the most stringent regulatory standards.

There are two main types of tertiary treatment systems: disinfection and nutrient removal. Disinfection systems eliminate harmful pathogens like bacteria, viruses, and parasites. Nutrient removal systems target phosphorus or excess nitrogen, which can harm delicate ecosystems.

Tertiary systems offer flexibility, allowing property owners to release treated wastewater directly into watercourses or ditches (a process called surface discharge). They are especially useful on sites that can’t support a typical drain field.

UV disinfection systems for wastewater treatment

2D diagram of how a UV disinfection septic system works, including the septic tank and secondary wastewater treatment unit.


Ultraviolet (UV) disinfection systems use UV rays to eliminate harmful microorganisms from wastewater. This tertiary technology allows the safe discharge of treated wastewater directly into watercourses or ditches.

UV disinfection systems are ideal for sites with limited space or inadequate soil conditions for a conventional septic drain field. However, it's important to consider the long-term operating costs, such as electricity, bulb replacements, and regular maintenance.

A UV disinfection unit receives wastewater after it passes through a septic tank and an advanced secondary treatment system.

Inside the disinfection unit, wastewater circulates around a UV lamp protected by a quartz sleeve. Radiation from the lamp penetrates wastewater and kills viruses, parasites, and harmful bacteria. The treatment process uses no chemicals and produces no harmful by-products.

After disinfection, the unit pumps treated wastewater downstream, where it is safely discharged into a ditch or watercourse.

Advantages:

  • produces high-quality effluent
  • appropriate for sites with impermeable soils
  • ideal for small lots
     

Disadvantages:

  • regular maintenance (often twice per year)
  • electricity for UV lamp
  • costs to replace UV lamp

Passive disinfection filters for wastewater treatment

2D diagram of how a passive disinfection septic system works, including the septic tank and secondary wastewater treatment unit.


Passive disinfection filters use a sloped sand layer as a substitute for permeable soil. Bacteria in the sand layer remove pathogens before effluent is safely discharged into a watercourse or ditch.

Passive disinfection is a good fit for large sites where conventional drain fields are not feasible. It offers lower operating costs than UV disinfection, but regular maintenance is still necessary.

This solution was developed by our team and is offered exclusively through Premier Tech Water and Environment.

Wastewater flows through a septic tank and an advanced secondary treatment system before it reaches the passive disinfection filter.

A distribution system scatters wastewater across the upper portion of a sloped sand layer. Bacteria in the sand disinfect wastewater as it flows down the slope.

A recirculation station at the bottom of the slope sends some effluent back to the top. This maintains stable moisture levels in the sand, which keeps the filter active even if it is used infrequently. The rest of the effluent is sent into a watercourse or ditch for final dispersal.

Advantages:

  • produces high-quality effluent
  • passive treatment process
  • appropriate for sites with impermeable soils
  • low operating costs
     

Disadvantages:

  • large overall footprint
  • regular maintenance
  • electricity for pumps
  • septic sand is non-renewable and increasingly expensive

Nitrogen reducing septic systems

2D diagram of how a nitrogen reducing septic system works, including the septic tank and secondary wastewater treatment unit.


Nitrogen reducing systems use aeration or recirculation to remove nitrates and other nitrogen compounds from wastewater. Without treatment, these compounds lead to algae blooms in nearby lakes and rivers. They also put public health at risk by contaminating drinking water resources.

This treatment solution is compact and discreet, making it ideal for small lots in ecologically sensitive areas. But like other tertiary systems, it requires regular maintenance and electricity to power pumps.

There are a few low-nitrogen technologies on the market, and no two work in exactly the same way. As a basic introduction to this type of solution, we'll use our Rewatec nitrogen removal system as an example.

First, raw wastewater flows into a septic tank. Solids settle on the bottom and clarified liquid flows into the Ecoflo compact biofilter for treatment.

Inside the compact biofilter, wastewater percolates through a coco filter that traps and removes pollutants. Ammonia and organic nitrogen compounds naturally convert into nitrates during this process.

After wastewater passes through the coco filter, it moves into a flow divider tank. The flow divider recirculates one portion of treated wastewater to the septic tank, where nitrates transform into harmless nitrogen gas that evaporates in the air.

The flow divider safely discharges the remaining portion of treated wastewater into the environment.

Advantages:

Disadvantages:

  • regular maintenance
  • electricity for pumps

Residential phosphorus removal septic systems

2D diagram of how a phosphorus removal septic system works, including the septic tank and sand filter.


Phosphorus removal systems come in many shapes and sizes. Some use electricity to trigger chemical reactions that remove phosphorus from wastewater. This treatment prevents excess phosphorus in lakes and rivers, which would otherwise lead to algae blooms that suffocate native species.

Systems in this category offer reliability and ease of maintenance. But there are drawbacks. They produce more sludge than other systems, which means regular sludge removal is needed for optimal performance. The long-term operating costs are also higher compared to other tertiary treatment options.

There are many phosphorus removal technologies available. Each works a bit differently. Let's keep things simple by focusing on the ones that use electricity to trigger chemical reactions.

In these systems, wastewater first flows into a primary reactor. Solids settle on the bottom and clarified liquid exits through a pipe for further treatment.

The pipe leads to another tank that has two chambers: a reaction zone and a separation zone.

In the reaction zone, there are submerged electrodes. They release aluminum particles that react with phosphorus in wastewater. This process transforms soluble phosphorus into solid compounds.

In the separation zone, the solid particles settle on the bottom of the tank. They are then pumped back into the primary reactor, where they settle as sludge that can be removed as needed.

Clarified wastewater forms at the top of the separation zone. The system discharges this wastewater to a sand filter, where it safely disperses into the environment.

Advantages:

  • self-cleaning options available
  • simple maintenance
  • ideal for small lots
     

Disadvantages:

  • produces more sludge than other systems
  • higher operating costs than other tertiary systems
  • electricity for pumps and treatment

So ... what is the best septic system?

The Ecoflo product range, including polyethylene, concrete, and fibreglass advanced secondary wastewater treatment systems.

Based on our decades of experience in the wastewater treatment industry, we believe the Ecoflo range of septic systems is the best on the market. All models are discreet, they use no electricity, and they are installed for life.

Ecoflo systems use a sustainable coco filter that offers years of effective performance. When it clogs, there is no need to replace your entire system. Our team simply removes the old filter and installs a new one to restore your system’s original treatment performance.

The renewal process has no limits. You can repeat it again and again, for as long as you own your system. Plus, it uses no heavy machinery, and it has minimal impact on your landscaping.

That makes Ecoflo an excellent long-term investment for your property — and the planet.

Start your septic project here

Need help choosing a septic system? We're here for you! Tell us about your goals and together we'll find the ideal solution for your needs.

Talk with an expert

Related products